Induction sealer quote checklist
Prepare the cap, liner, container and line-speed information Lancing UK needs for a clearer recommendation.
Information that speeds up an induction sealer quotation
A clear enquiry helps Lancing UK check whether the application fits the automatic induction foil sealing range and which head option should be considered. The most useful information is practical line data rather than a broad request for a sealer.
| Container | Material, diameter, height range, neck finish, photographs and samples where available. |
|---|---|
| Cap and liner | Cap outside diameter, cap style, liner datasheet or supplier reference and confirmation that the liner is intended for the container material. |
| Product | Liquid, powder, cream, chemical or food type; whether product contamination on the mouth is likely; and any storage or transport concerns. |
| Line conditions | Target containers per minute, conveyor width and height, bottle spacing, capper position and available electrical supply. |
| Quality checks | Required peel, leak, burst, visual inspection or retained-sample checks, plus any foil detection or reject requirements. |
Photos and samples to include
Useful photos include the full container, the cap underside with liner, the container mouth, the existing line position and the conveyor. Samples are especially useful where there are several cap sizes, unusual neck finishes or a history of leakage.
When to request a different packaging route
If the cap cannot hold a liner, the container mouth is uneven, the liner is not available for the container material or the product is not suitable for the chosen liner, another sealing or closure route may be more practical. Lancing UK can review the project before formal quotation.
Frequently asked questions
Do I need to send physical samples?
Photos and data can start the discussion, but samples are useful when cap range, liner compatibility or seal quality needs to be proven.
What cap measurements are needed?
Send the cap outside diameter, neck finish details, bottle height and the smallest and largest format to be run.
Why does Lancing need liner information?
The liner must match the container material and product conditions. The machine cannot compensate for an incompatible liner.
Should target speed be quoted as bottles per minute?
Yes. Also include bottle spacing and conveyor conditions because dwell time under the head affects the result.
Ready to request a quote?
Use the contact form and include the checklist details above. The more complete the pack information, the faster the machine range can be narrowed.
Send information in a way that maps to the machine, pack and validation checks.
The fastest induction sealer quotation is not just a request for a price. It gives enough information to confirm whether the pack can seal, which sealing head range is likely, how the unit will sit after capping and what evidence should be produced before sign-off.
Pack evidence
Cap outside diameter, cap type, foil liner details, container material, neck finish and photographs of the cap and bottle mouth.
Line evidence
Current conveyor width and height, bottle spacing, target containers per minute, available straight length and whether the capper is already installed.
Quality evidence
Whether the priority is tamper evidence, leakage control, freshness support, transport handling or documented retained-sample checks.